Digga North America     Digga Europe     Digga France     Digga Australia


Drilling Drives for Mini Loaders 0.85ton to 1ton

Digga's range of drilling drives for 0.85 ton to 1 ton Mini Loaders are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

Digga drilling drives are backed by industry leading warranty and local factory support.

Features 
  • Compact Digga manufactured gearbox
  • Fitted with a Digga designed Eaton motor
  • 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
  • Lifetime shaft pull out warranty
  • 5 year gear box and 3 year motor warranty
  • Over 30 years design and manufacturing experience
Drilling Drive Specifications 
Details 1MDS
Torque
(ft-lbs @ 3000 Psi)
2,119
Max Torque
(ft-lbs @ 3500 Psi)
N / A
Recommended Flow (gpm) 6-16
Motor Type Eaton
Max pressure
(do not exceed)
3000 psi @ 11 gpm
Max flow
(do not exceed)
15 gpm @ 2300 psi
Max horse power 20
Pressure relief valve Optional
standard output shaft 2" Hex
 
Recommended auger A4 / rC4
Max drilling diameter
(clay / shale)*
12"
Max drilling diameter
(earth)*
24"
Weight (lbs) 72
Overall length (in) 16.6"
Diameter (in) 8"
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
Digga North America - PDI-9 Auger Drive Unit