2 speed Anchor drives
  • Digga North America - Anchor drives.

2 Speed Anchor drives 13,000-16,000ft-lbs

Digga's two speed screw pile anchor drives can be used for a wider range of applications up to 16,000 ft-lbs.

Developed in conjunction with leading screw anchor / helical pile installers around the world, Digga brings you the only true anchor drives available - Designed and manufactured in-house specifically for the rigours of the application. This means that your host machine can operate in its most efficient horse power range to minimize wear and tear, optimizing performance to ensure a higher return on your investment.

Features

  • It's like owning 2 drives in 1 - Install both small and larger piles
  • Improve productivity by installing smaller piers with more efficiency
  • Minimize fuel consumption when running at lower RPM
  • Change speeds with just the flick of a switch
  • Fitted with an Eaton VIS motor for consistent pile installation
  • 3yr Gearbox & 2yr Motor Warranty
  • No additional maintenance costs

More torque, less pressure - Two pressure series available to suit your requirements

  • Standard pressure series (ADT) - Machines with 3500 PSI
  • Low Pressure series (ALT) - Machines with 3000 PSI
Digga North America - ADT-16 Auger Drive Unit

Why use 2 speed anchor drives? - Digga North America


Specs 13adt 16aDt 13alt 16alt
Nominal Torque (FT LBS) 13,347 16,448 14,098 17,739
Motor Type Eaton Eaton Eaton Eaton
Max pressure (do not exceed) 3500 psi @ 33 gpm 3000 psi @ 33 gpm
Max flow (do not exceed) 53 gpm @ 2200 psi 53 gpm @ 2200 psi
Max horse power 67 67 67 67
Pressure relief valve Included Included Included Included
Energy Control Valve Included Included Included Included
standard output shaft 3" Hex 3" Hex 3" Hex 3" Hex
 
Weight 485 lbs 485 lbs 485 lbs 485 lbs
Overall length (in) 42.1" 42.1" 42.1" 42.1"
Diameter (in) 13.4" 13.4" 13.4" 13.4"