Anchor drives
    Digga North America - Halo range for anchor drives.
  • Digga North America - Anchor drives.

Anchor drives 5,000-7,000ft-lbs

Developed in conjunction with leading screw anchor / helical pile installers around the world, Digga brings you the only true anchor drives available - designed and manufactured inhouse specifically for the rigours of application. The host machine operates in its most efficient HP range to minimize wear and tear, optimizing performance and ensuring highest returns.

Features

  • High efficiency EATON/DIGGA bell geroler hydraulic motor with integrated Pressure Relief Valve (PRV) ensures maximum volumetric effeciency for consistent and efficient pile installation
  • More linear feet in the ground = greater returns
  • ECV (Energy Control Valve) to prevent rapid decompression
    of oil, caused by the reverse energy created by pile kick-back
  • Engineered hood & ears for maximum strength
  • Extreme duty shaft retaining system
  • No Case Drain required
  • 3yr Gearbox & 2yr Motor Warranty (when fitted with an ECV)

More torque, less pressure - Two pressure series available to suit your requirements

  • Standard pressure series (ADS) - Machines with 3500 PSI
  • Low Pressure series (ALS) - Machines with 3000 PSI
Digga North America - PDI-5 Auger Drive Unit


Specs 5ads 6ads 7ads 7als
Nominal Torque (FT LBS) 4,553 5,728 7,189 7,166
Motor Type Eaton Eaton Eaton Eaton
Max Pressure - Do Not Exceed 3500 psi @ 27 gpm 3000 psi @ 27 gpm
Max Flow - Do Not Exceed 55 gpm @1700 psi 55 gpm @1700 psi
Max Horse Power 55 55 55 55
Pressure Relief Valve Included Included Included Included
Energy Control Valve Included Included Included Included
Standard Output Shaft 2.5" Hex 2.5" Hex 2.5" Hex 2.5" Hex
Halo Optional Optional Optional Optional
 
Weight (lbs) 288 lbs 288 lbs 288 lbs 288 lbs
Overall length (in) 33.7" 33.7" 33.7" 33.7"
Diameter (in) 11.4" 11.4" 11.4" 11.4"