Digga North America     Digga Europe     Digga France     Digga Australia


2 Speed Drilling Drives for High Flow Skid Steer Loaders

Digga's 2 Speed Auger Drives are designed to suit excavators, skid steer loaders, truck cranes, front end loaders, wheeled loaders and backhoes with flows between 10 to 36 gpm. We distribute our 2 Speed Drilling Drives throughout North America.

Features 
  • Compact high torque Digga manufactured gearbox
  • Highly efficient design with less moving parts
  • Fitted with Eaton VIS motor
  • Integrated PRV (Pressure Relief Valve)
  • Extreme duty shaft locking system
  • Drive fits down the hole for greater digging depth
  • Low maintenance with 5yr gear box and 3yr motor warranty
Description 5ddt 6ddt
Torque (ft-lbs @ 3000 Psi) 4,067 5,012
Max Torque (ft-lbs @ 3500 Psi) 4,745 5,847
Recommended Flow (gpm) 10-36 10-36
Motor Type Eaton Eaton
Max pressure (do not exceed) 3500 psi @ 27 gpm
Max flow (do not exceed) 53 gpm @ 1800 psi
Max horse power 55 55
Pressure relief valve Included Included
standard output shaft 2.5" Hex 2.5" Hex
 
Recommended auger A6 / rC6 A6 / rC6
Max auger diameter (clay / shale)* 24" 30"
Max auger diameter (earth)* 40" 40"
Weight (lbs) 350 350
Overall length (in) 34.4" 34.4"
Diameter (in) 13.4" 13.4"
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only. 		Digga North America - PDI-5 2 Speed Auger Drive Unit

Why use 2 speed drilling drives? - Digga North America