Helical pile monitor and data logger
Utilising the same technology as the Torque hub, the Torque Spool delivers over 99% accurate torque readings. Data is sent over a robust 2.4 GHz RF FHSS signal to the handheld display / datalogger. The Torque Spool measures not only torque, but also inclination. This torque monitoring and data logging device is mounted between the output shaft and drive tool. To suit MD, UD and XD anchor drives (80,000 ft-lbs to 375,000 ft-lbs).
New reporting capabilities
Reports are exportable directly from the display, either via email using a smartphone with its’ hotspot enabled or through the onboard USB port connected to a flash drive.
Torque Spools are available for MD, UD and XD Anchor Drives (80,000 FT-LBS to 360,000 FT-LBS).
More than just torque
Digga's Torque Spool provides you with a 99%+ accurate torque measurement alignment indicator and data logging proven solution.
Mounts between the output shaft and drive tool.
Rugged in-cab display
WiFi In-Cab Display for better, more stable data transfer. Monitor and record your jobs with ease with a 7” touch-enabled display and rugged IP67 ABS casing. Circuit boards, firmware, and software are all designed specific for the application. Fully potted, sealed, gasketed, and cushioned to ensure maximum protection and long life.
Export data logging records
Record torque, pile depth, angle, date, and time with additional user-defined export field options available. Reports are exported as both bare data (.dat file – open in Excel), and as a PDF line chart.
|Rated Output (R.O.)||2 mV/V nominal|
|Nonlinearity||0.1% of R.O.|
|Hysteresis||0.1% of R.O.|
|Nonrepeatability||0.05% of R.O.|
|Zero Balance||0.1% of R.O|
|Compensated Temp. Range||16° to 71°C|
|Safe Temp. Range||-54° to 93°C|
|Temp. Effect on Output||0.005% of Load/°C|
|Temp. Effect on Zero||0.005% of R.O./°C|
|Terminal Resistance||350 ohms nominal|
|Excitation Voltage||5 VDC|
|Safe Overload||150% of R.O|